Drill Safety Warnings; Screwdriver Safety Warnings; Additional Safety Warnings - Casals VT50REA Manual De Instrucciones

careless action can cause severe injury within a
fraction of a second.
POWER TOOL USE AND CARE
- Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed
- Do not use the power tool if the switch does
not turn it on and off. Any power tool that can-
not be controlled with the switch is dangerous
and must be repaired
- Disconnect the plug from the power source
and/or battery pack, if detachable, from the
power tool before making any adjustments,
changing accessories, or storing power
tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally
- Store idle power tool out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are dan-
gerous in the hands of untrained users
- Maintain power tools and accessories.
Check for misalignment or binding of mo-
ving parts, breakage of parts and any other
condition that may affect the power tool's
operation. If damaged, have the power tool
repaired before use. Many accidents are cau-
sed by poorly maintained power tools
- Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control
- Use the power tool, accessories and tool bits
etc in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
- Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpec-
ted situations
SERVICE
- Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.

DRILL SAFETY WARNINGS

- Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
- Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal injury.
- Hold power tool by insulated gripping sur-
faces, when performing an operation where
the cutting accessory may contact hidden
wiring. Cutting accessory contacting a "live"
wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.

SCREWDRIVER SAFETY WARNINGS

- Hold power tool by insulated gripping sur-
faces, when performing an operation where
the cutting accessory may contact hidden
wiring or its own cord. Cutting accessory con-
tacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.

ADDITIONAL SAFETY WARNINGS

- If other gas or fuel appliances can be used at
the same time in the room where the appliance
is to be used, that room must be well ventilated.
- Do not place inflammable material near the
appliance.
- CAUTION: In order to prevent overheating do
not cover the appliance.
- Ensure that neither the air access nor exit beco-
me either totally or partially covered by drapery,
clothing, etc., as this increases the risk of fire.
- Do not use the appliance if the cable or plug is
damaged.
- Ensure that the voltage indicated on the rating
label matches the mains voltage before plug-
ging in the appliance.
- Connect the appliance to a socket that can
supply a minimum of 10 amperes.
- Only use the appliance with the specific electric
connector provided.
- If any of the appliance casings breaks, immedi-
ately disconnect the appliance from the mains to
prevent the possibility of an electric shock.
- Do not use the appliance if it has fallen on the
floor, if there are visible signs of damage or if it
has a leak.
- CAUTION: Maintain the appliance dry.
- CAUTION: Do not use the appliance near water.
- Do not use the appliance with damp hands or
feet, or when barefooted.
- Do not clip or crease the power cord.