Dell PowerSwitch N4000 Serie Guía De Introducción página 78

示例工作階段
註：
IP
• SNMP
•
• OOB
註：
<Enter>
POST
(Unit 1-Waiting to select management unit)>
Applying Global configuration, please wait...
Welcome to Dell Easy Setup Wizard
The Setup Wizard guides you through the initial switch
configuration, and gets you up and running as quickly
as possible. You can skip the setup wizard, and enter
CLI mode to manually configure the switch. You must
respond to the next question to run the setup wizard
within 60 seconds, otherwise the system will continue
with normal operation using the default system
configuration. Note: You can exit the setup wizard at
any point by entering [ctrl+z].
Would you like to run the setup wizard (you must
answer this question within 60 seconds)? [Y/N] y
76
root
192.168.2.1
admin123
IP
[ ]
Dell 簡易安裝精靈