Midland 777 PRO Guia De Inicio Rapido página 6

Display
The two bigger digits indicate the selected channel
VOX
VOX function indication
Keypad lock activated
Low battery indicator
H L
High or low power selection in TX (only in the PMR446 band)
RX
Reception mode (busy channel)
TX
Transmission mode (PTT pressed)
The three smaller digits indicate the CTCSS tone or DCS code selected (CTCSS:
1-38; DCS: 1–104)
Type of subaudio tone selected
DCSCTCSS
Vibra-Call function activated
PMR
This icon indicates the radio is operating on the new 8 PMR446 channels
Selecting the PMR446 bands - 8CH or 16CH
777 PRO can operate on two PMR446 bands: a traditional band with 8 channels and a new one
with 16 channels.
With the 8 channels it is possible to communicate with all radios working on the operative band
446Mhz-446.1Mhz.
While with the 16 channels, the operating band is extended up to 446.2Mhz.
When 777 PRO is set on the "new channels", the display will show "PMR".
How to activate the PMR446 bands
1. Switch off the radio.
2. Turn it on by pressing ▲ and ▼.
3. The display will show "-_ _".
4. Press the following keys in the correct sequence: ▼ - MENU -▲; the symbol "-_ _" on
the display will be replaced by a series of "o".
5. In case of wrong sequence, 777 PRO will exit the procedure.
6. At the end of the sequence, the display will show the frequency band currently in use. Now
you can select "P8"(traditional band) or "P16"(new band) by means of the ▲/▼ controls.
7. Press PTT to confirm your selection.