Supplies Required - Bradley SN2013/AST4 Manual Del Usuario

Installation
Supplies required for installation:
• 3/8" diameter bolts and floor/wall anchors to anchor washfountain pedestal to floor and wall
• 1/2" nominal copper tubing for hot and cold water supply lines
• Standard P-trap (trap included with "B" or "H" drain type and some optional equipment)
• 1-1/2" drain lines and fittings
• Pipe sealant
Supplies recommended for installation:
• 1-1/2" vent or tie pipe on types vented through washfountain column
• Caulk (may be applied between backsplash and bowl to avoid debris accumulation)
Dimensions - Sentry
Hand Control
43-3/4"
(1111)
25-1/16"
(637)
Standard and juvenile height models with
hand control are ADA/TAS compliant.
Juvenile Height dimensions, where
different, are shown in Italics.
Bradley • 215-784 Rev. P; ECN 14-00-007
Corner Washfountain
™
42-9/16" (1081)
38-9/16" (979)
33-7/16" (849)
29-7/16" (747)
29-9/16" (751)
25-9/16" (649)
9" (229)
5" (127)
13-5/16"
(338)
18-3/4"
(476)
Wall-Mounted With Hand Control
SN2013/AST4, SN2013/AST4-F, SN2033/AST4
Foot Control
45-5/8" (1159)
41-5/8" (1057)
43-3/4"
(1111)
9" (229)
5" (127)
13-5/16"
(338)
25-1/16"
18-3/4"
(637)
(476)
43-3/4"
(1111)
8-1/8"
(206)
6"
29-9/16" (751)
(152)
25-9/16" (649)
3-1/16" 3-11/16"
(78) (94)
45-5/8" (1159)
41-5/8" (1057)
42-9/16" (1081)
38-9/16" (979)
33-7/16" (849)
29-7/16" (747)
29-9/16" (751)
25-9/16" (649)
8/15/2014
(mm)
45-5/8" (1159)
41-5/8" (1057)
33-7/16" (849)
29-7/16" (747)
3