BEARWARE 303394 Manual página 24

8. Basic Settings
Press and hold the "SET" button for about 3 seconds to configure the basic
settings. With the "UP" and "DOWN" buttons, you can change the values accord-
ingly.
By briefly pressing the "SET" button during basic settings, you can confirm entry
and proceed to the next option. In this way, you can change and customise the
following settings in the sequence mentioned below:
• Year
• Month
• Day
• Language setting - You can set the language in which the days of
the week appear on the display by using the following shortcuts
and change the values with the "UP" and "DOWN" buttons: GE
(German), DA (Danish), ES (Spanish), NE (Dutch), FR (French), IT
(Italian), EN (English)
• Hour
• Minute
• Time zone - Note: If you set the time zone, for example, to + 01
and the weather station is actuated using the DCF-signal, then the
clock displays one hour later than the DCF-signal.
8.1 Weather forecast function
The weather station calculates a weather forecast based on changes in the air
pressure. Since data regarding changes in air pressure is not available when the
device is switched on for the first time, the weather forecast at this time is ran-
dom. The weather station will be able to calculate a forecast only after a couple
of days.
It has 4 different weather forecasts (sunny, slightly cloudy, cloudy and rainy).
Important notice! If you use the device in an air-conditioned room, the weather
forecast may not be the same since the air conditioning system falsifies the result.
24
English