Bellman & Symfon BE1411 Manual Del Usuario página 27

If
No green light
appears
on the door
transmitter when
you ring the doorbell
The receiver is
activated for no
reason
BE1411_055MAN009.indb 8
Try this
Ring the doorbell while moving the door transmitter
closer and further away from the sound source. The
ideal distance between the door transmitter micro-
phone and the sound source is < 3 cm.
bell's sound. See Programming.
see electromagnetic detection in the Installer's Guide.
hold button 1 and 2 simultaneously for 5 seconds to
clear the recorded sounds and repeat the steps above.
Change the radio key on all units, see Changing the
radio key in the Installer's Guide.
EN
26
2015/2/11 9:51:36