If
No green light
appears on the
door transmitter
when you ring the
doorbell
The receiver is
activated for no
reason
BE1411_055MAN009.indb 18
Try this
Ring the doorbell while moving the door transmitter
closer and further away from the sound source. The ideal
distance between the door transmitter microphone and
the sound source is < 3 cm.
sound. See Programming.
netic detection, see Using electromagnetic detection.
hold button 1 and 2 simultaneously for 5 seconds to
clear the recorded sounds and repeat the steps above.
that triggers your system. Change the radio key on all
units, see Changing the radio key.
-
92
2015/2/11 9:51:48