Bellman & Symfon BE1411 Manual Del Usuario página 87

Customizing the signal
The door transmitter controls the signal pattern on
the receiver. To customize the signal pattern, move
the signal switches
the following spreads.
Switch no. 4 is for electromagnetic detection.
Changing the radio key
If you install multiple systems, you can set a
unique radio key for each system to avoid radio
interference. Move any radio key switch
the up=on position to change the radio key.
Please note
All Visit products within the same system must be set
to the same radio key in order to operate as a group.
BE1411_055MAN009.indb 12
A
according to the tables on
A
B
to
B
On
Off
On
Off
86
2015/2/11 9:51:46