K2 Pumps UTA02502K Manual Del Propietário página 4

INSTALLATION
CAUTION: Always use the handle to lift the pump. Never use the power cord to lift the pump. To avoid skin burns,
unplug the pump and allow time for it to cool after periods of extended use.
1. Connecting adapter
Attach a 1 in. female adapter (B) to the pump discharge.

NOTE: Minimize pressure loss (or maximize flow rate) by using a larger inner
diameter hose or by shortening the hose.
2. Connecting a 3/4 in. garden hose or 1-1/4 in. hose kit
 Attach a garden hose with a 3/4 in. garden hose thread (not included) to the
adapter (B).
NOTE: Be sure the 3/4 in. garden hose thread connector has a rubber gasket to
minimize water leaks.
If you would prefer to use a 1-1/4 in. hose kit (not included) in order to pump water
away more quickly.
WARNING: Secure the discharge hose before plugging in the pump. An
unsecured discharge hose may "whip" possibly causing personal injury, and/or
property damage.
Securely attach the hose kit (not included) to the adapter (B).

4 For Professional Technical Support call 1-844-242-2475