Final Assembly Instructions - Allen + Roth VICTORIA HARBOR LP8242LCH Manual Del Usuario

FINAL ASSEMBLY INSTRUCTIONS

1. Remove one of the two preassembled
shoulder screws in the hanger bracket (B).
Loosen the second shoulder screw without
fully removing it. Rotate ceiling canopy (D) so
second shoulder screw moves into the small
opening of the keyslot. Tighten shoulder
screw. Re-install the previously removed
shoulder screw to fully assemble ceiling
canopy (D) to hanger bracket (B).
WARNING
To avoid possible fire or shock, make sure the
electrical wires are completely inside the canopy
housing and not pinched between the housing
and the ceiling.
2. Securely attach and tighten the canopy
screw cover (E) over the shoulder screws in
the hanger bracket (B), utilizing the keyslot
twist-lock feature.
3. Position the blades (P) over the motor
assembly (A) with threaded posts showing.
Make sure the bottom edge of the blades (P)
are fully seated against the flywheel of motor
assembly (A). Install and tighten the
washer-head screws (AA) with fiber washers
(BB) to secure the blades (P) to the flywheel of
motor assembly (A).
Hardware Used
Washer-Head
AA
Screw
Fiber
BB
Washer
x 15
x 15
13
1
2
E
3
A
Lowes.com/allenandroth
D
AA
P
BB