Care And Maintenance; Troubleshooting - Allen + Roth VICTORIA HARBOR LP8242LCH Manual Del Usuario

CARE AND MAINTENANCE

When cleaning, use only a soft brush or lint-free cloth to avoid scratching the finish.
WARNING
Do not use water when cleaning the ceiling fan. It could damage the motor or the finish and
create the possibility of electrical shock.
RECOMMENDED: Periodically check that the fan motor unit screws, blade screws, support
housing and light kit screws are tight and secure.
Re-lamp with the appropriate wattage bulb. Do not exceed the wattage indicated on the bulb
socket.
Do not install or use fan if any part is damaged or missing.

TROUBLESHOOTING

PROBLEM
Fan will not start.
Fan sounds noisy.
Use 40-watt candelabra-base bulbs.
POSSIBLE CAUSE
1. Fuse or circuit breaker blown.
2. Loose power line connections
to the fan.
3. Reversing switch in neutral position.
4. Dead battery in remote control.
1. Blades not attached to fan.
2. Loose screws in motor housing.
3. Screws securing fan blade holders to
motor hub are loose.
4. Wire connectors inside housing are
rattling.
CORRECTIVE ACTION
1. Check main and branch circuit
fuses or circuit breakers.
2. Check line wire connections to
fan.
Make sure main power is turned
off!
3. Make sure reversing switch
position is all the way to one
side.
4. Replace with new battery.
1. Attach blades to fan before
operating.
2. Check to make sure all screws
3. Check to make sure the screws
4. Check to make sure wire
19
WARNING
in motor housing are snug
(do not overtighten).
that attach the fan blade
holders to the motor hub are tight.
connectors in switch housing
are not rattling against each
other or against the interior wall
of the switch housing.
Lowes.com/allenandroth