Kohler K-16135 Guia De Instalacion página 4

1/2"
(1.3 cm)
2. Install the Spout
Remove the temporary nipple.
Apply thread sealant and install a 1/2" nipple so it extends 1/2"
(1.3 cm) beyond the finished wall.
Apply a bead of plumbers putty or other sealant around the inlet
end of the spout according to the manufacturer's instructions.
Carefully tighten with a clean strap wrench.
113281-2-AB
Nipple
Spout
Apply
plumbers
putty.
4 Kohler Co.