Descargar Imprimir esta página

Power Source - Panacom SP-3114APP Manual Del Usuario

Publicidad

Idiomas disponibles

Idiomas disponibles

POWER SOURCE

1. Please charge the unit at least 4 hours before first time using.
2. Long press the POWER/INPUT button on the panel to switch on or off the speaker.
CHARGE THE BATTERY
When the battery is charging, the CHARGE STATUS lights red. After the battery has fully charged,
the light turns to be green.
1. Connect the AC adaptor to the DC IN JACK of the speaker firmly, and plug it into a wall outlet.
2. When the battery is fully charged, first disconnect the AC adaptor from the speaker,then from the
wall outlet.
3.The speaker works normally when charging.
POWER/INPUT BUTTON
Press POWER/INPUT button on the front panel to select the mode (LINE,USB,BT or FM).
REPEAT FUNCTION
1. During playing status,press REPEAT button on the front panel once to repeat playing the current
track.To cancel the repeat option,press the REPEAT button again.
2. REPEAT function only available for USB card playing modes(not for Bluetooch/Line /FM).
RECORDER FUNCTION
Recording: Insert USB card, plug in microphone, long press REPEAT button on the front panel, then
the machine displays "REC" to start recording, short press the REPEAT button to stop recording and
play the recording automatically, press POWER/INPUT to return to USB card playing state.
Play the recording: Insert USB card, long press
to play the recording file and press
Or
button to select recording file.
PREVIOUS/NEXT BUTTON
By pressing PREVIOUS/NEXT button on the front panel ,you can select a specific song from the
play list.
PAUSE/PLAY BUTTON
To stop playing the current track,please press PAUSE/PLAY button on the front panel.
Press it once again to continue playing.
VOLUME ADJUSTMENT DIAL
Twist the dial anticlockwise to decrease the volume and clockwise to increase the volume.
MIC IN JACK
Plug in microphone directly for playing.
USB JACK
Insert USB card directly for palying.
LINE IN JACK
1. Connect an audio cable (not included) to the LINE IN JACK of the speaker and to the audio output
socket on the external audio devices such as MP3 player, discman, etc,then select LINE by pressing
the POWER/INPUT button on the front panel .
2. Play from an external audio device.
FM FUNCTIONS
1. Press POWER/INPUT to select FM radio.
2. Press PLAY/PAUSE button on front panel for automatic searching and saving the radio stations.
Press PREVIOUS/NEXT button to select a specific radio station.
Pg. 4

Publicidad

loading