BT CONNECTION
Please press POWER/INPUT button on control panel to select BT mode. Simultaneously
open the BT setting on your phone, tablet or any other BT enabled audio device and select
"SP-3114APP" (no need to match code),the unit and device will then connected via BT. Press
the "next song" and "previous song" button on the control panel to select the song, press"
play/pause" button to control the playing status.
PANACOM CONTROLLER APP
To control the device via your phone, please find and install the app "Panacom Controller". Open
the App "Panacom Controller" on your phone, there are 7 function icons on the main page:
1. BT Music play
2. USB card play
3. Light control colour, brightness and light flash mode
4. FM Radio
5. Control BT connect
6. Line In input - mute
7. Equalizer,volume adjustment for music, Microphone
and quitar input.
(1) BT Music play
Press
to enter into BT Music play page, Press "Pick songs to play" to Pick Song page to
choose the song you want to play, press "Done" to return to BT Music play page, also you can
operate pause, play, backward, forward&volume adjustment, repeat, random play. Press "Back" to
return to the main page.
(2) USB card play
When inserting a USB into the speaker, press
to enter the USB Card play page. To choose
a song and play music on the USB card, press "Play" to enter into the play control page ,where you
can operate pause, play, backward, forward & volume adjustment. Press "List" to return to USB list
page, press "Back" to return to the main page.
(3) Light control colours, brightness and colour change mode
Press
to enter into Light Control page, you can select any colour to show the light colour on the
speaker, as well as adjust the brightness of the light. To go back to main page, press "
" in the left corner.
Press "Profiles" to enter into Light Effect mode page, you can choose from a total of 12 pre-set light
effect modes. To return to Light Control page, press "Light" in the left corner.
(4) FM Radio
Press
to enter into FM radio mode, press SCAN to enter into radio program automatic scan.
Press
for radio program manual scan, Top and bottom trimming, Turn the TUNER button
radio station can be adjusted. Slide around to adjust radio frequency between 87.5MHz~108.0MHz.
Pg. 5