Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS MANUAL
1. SPECIFICATIONS AND TECHNICAL DATA
1.
NAME OF PARTS (SEE Fig.1)
1
Frame
2
Cylinder Cap
Contact Arm
3
4
Door
5
Magazine
2.
TOOL SPECIFICATIONS
HEIGHT
WIDTH
LENGTH
WEIGHT
RECOMMENDED OPERATING PRESSURE
LOADING CAPACITY
AIR CONSUMPTION
3.
FASTENER SPECIFICATIONS
Drywall screw
4.
TECHNICAL DATA
NOISE
A-weighted single-event sound power level ------ LWA, 1s, d
A-weighted single-event emission sound pressure level at work station------ LpA, 1s, d
Uncertainty
These values are determined and documented in accordance to EN12549:1999+A1:2008.
NOTE: These values are tool-related characteristic values and do not represent the noise generation at the point of use. Noise at the point
of use will for example depend on the working environment, the workpiece, the workpiece support, and the number of driving operations.
In addition, reference should be made to noise reduction measures.
NOTE: Workplace design can also serve to reduce noise levels, for example placing workpieces on sound-damping supports
(see also ISO 11690-1).
ENGLISH
6
Trigger
7
Grip
Changeover lever
8
9
Regulator
0
Plug
8mm (0.31")
25mm (1") to 41mm (1-5/8")
3.5mm (#6) to 4.0mm (#7)
a
End Plug Cap
b
Hook
Trigger Lock Dial
c
312 mm (12-1/4")
116 mm (4-1/2")
300 mm (11-3/4")
1.9 kg (4.2 lbs)
18 to 23 bar (250 to 320 p.s.i.)
100 Screws
1.9 L at 23 bar (320 p.s.i.)
operating pressure
1
95.6 dB
93.9 dB
3 dB
Publicidad
Tabla de contenido
