Teranex Mini - Analog to SDI 12G
Convert video and audio from analog equipment such as
Betacam SP decks, HDV cameras and game consoles to
SD-HDI, HD-SDI and 12G-SDI video. A choice of analog
input formats is supported, including component SD/HD,
1
2
Connectors
1. Mini-B USB port
Connects to the Teranex setup utility via a Mac OS X or
Windows computer for adjusting settings and updating
your Teranex Mini's internal software.
2. Switches
Adjustable switches for changing settings.
3. LED Multi-Use Indicator
Glows white when the converter is receiving power and
green when a valid video input signal is detected. Will flash
on/off to identify individual converters via Blackmagic
Teranex Setup.
4. Power
Standard built in IEC C14 connector for 90 - 240 volt AC
power supply.
5. Y or NTSC/PAL
Analog component Y, NTSC or PAL composite input
BNC connector.
6. B-Y or S-VIDEO Y
Analog component B-Y, or S-Video Y input BNC connector.
Switches
Teranex Mini Analog to SDI 12G's switches provide the
following settings:
Switch 8 - Analog Audio, AES/EBU Audio
Set switch 8 to OFF to select balanced analog audio, or to
ON for digital AES/EBU audio input.
Switch 7 - 7.5 IRE - 0.0 IRE
The USA and countries using NTSC with 7.5 setup should
set switch 7 to OFF. If you're working in countries not using
7.5 setup, set switch 7 to ON. This setting only affects
composite or S-Video outputs.
S-Video, or composite NTSC and PAL. The converter's
12G-SDI outputs include the option to embed digital
AES/EBU or analog audio.
4
5
Y or NTSC/PAL
ETHERNET PoE+
3
8
7. R-Y or S-VIDEO C
Analog component R-Y, or S-Video C input BNC connector.
8. Ethernet PoE+
Connects to a network switch or computer so you can
change settings using Blackmagic Teranex Setup. The
Ethernet port also supports power over Ethernet plus.
9. SDI OUT
SDI video output BNC connector.
10. SDI OUT
SDI video output BNC connector.
11. L - Analog or AES/EBU
Balanced left channel analog audio, or digital AES/EBU
audio input XLR connector.
12. R - Analog, AES/EBU or Timecode
Balanced right channel analog audio, or digital AES/EBU
audio input XLR connector. Can also be configured for
timecode input.
Switch 6 - SMPTE Levels - Betacam Levels
This setting selects between SMPTE or Betacam video
levels. Set switch 6 to OFF for SMPTE levels, or to ON for
Betacam levels. SMPTE levels are more common and even
Betacam SP decks can use SMPTE levels so only switch
this to Betacam if you are sure that Betacam levels are
being used.
Switch 5 - Component, Composite or S-Video
Set switch 5 to OFF to select analog component video input,
or to ON for composite video and S-Video analog inputs.
23
6
7
PUSH
B-Y or S-VIDEO Y R-Y or S-VIDEO C
L - ANALOG
SDI OUT
SDI OUT
AES/EBU
9
10
11
PUSH
R - ANALOG
AES/EBU - T/C
12