KitchenAid KHB2351 Manual De Instrucciones página 7

OPERATING YOUR HAND BLENDER
USING THE BLENDING ARM
Use the blending arm attachment for
smoothies, milk shakes, soup, cooked
vegetables, frosting, or baby food.
1. Insert blending arm attachment into
motor body and twist to lock.
2. Plug the electrical cord into an electrical
wall socket.
3. Set Hand Blender on Speed 1. Adjust
the speed by turning the speed control
dial on top of the Hand Blender.
4. Insert the Hand Blender into the
mixture.
NOTE: Hand Blender should only be
immersed in liquids the length of the
attachment. Do not submerge beyond the
seam of the blending attachment. Do not
immerse the motor body into liquids or
other mixtures.
5. Press the Power button to activate the
Hand Blender.
6. When blending is complete, release the
power button before removing Hand
Blender from the mixture.
7. Unplug immediately after use
and before removing or changing
attachments.
W11321550A.indb 7
Blending: Insert Hand Blender with
blending arm attached into the jar
containing ingredients at an angle. Use
your free hand to cover the top of the
blending jar for better stability and to avoid
splattering. Remember to stop the Hand
Blender before removing it from the jar to
avoid splashing.
Blending
Drawing up: Rest the Hand Blender on the
bottom of the jar momentarily, then hold
at an angle and slowly draw it upwards
against the side of the jar. As the Hand
Blender is drawn up, you will notice the
ingredients from the bottom of the jar
being drawn up. When the ingredients
are no longer being drawn up from the
bottom, return the Hand Blender to the
bottom of the jar and repeat the process
until the ingredients are at the desired
consistency.
Drawing up
Wrist movement: Using a light circular
motion from your wrist, draw the Hand
Blender up slightly and let it fall again into
the ingredients. Allow your wrist motion
and the weight of the Hand Blender to do
the work.
Wrist
movement
OPERATING YOUR HAND BLENDER | 7
8/8/2019 4:15:20 PM