Electrical Requirements - KitchenAid KHB2351 Manual De Instrucciones

HAND BLENDER SAFETY
13. Keep hands and utensils out of the container while blending to prevent
the possibility of severe injury to persons or damage to the unit. A scraper may
be used, but must be used only when the unit is not running.
14. Blades are sharp. Handle carefully.
15. Refer to the "Care and Cleaning" section for instructions on cleaning the
surfaces in contact with food.
16. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by person responsible for their safety.
17. Always disconnect the Hand Blender from the supply if it is left unattended
and before assembling, disassembling or cleaning. Never leave the appliance
unattended while it is in operation.
SAVE THESE INSTRUCTIONS
This product is designed for household use only

ELECTRICAL REQUIREMENTS

Models KHB2351
Volts: 120 V.A.C.
Hertz: 60 Hz
Wattage: 220 W
W11321550A.indb 5
NOTE: Model KHB2351 have a polarized
plug (one blade is wider than the other).
To reduce the risk of electrical shock, this
plug will fit in an outlet only one way. If
the plug does not fit in the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician. Do not modify the
plug in any way.
Do not use an extension cord. If the
power supply cord is too short, have a
qualified electrician or service technician
install an outlet near the appliance.
A short power supply cord (or detachable
power supply cord) should be used to
reduce the risk resulting from becoming
entangled in or tripping over a longer
cord.
HAND BLENDER SAFETY | 5
8/8/2019 4:15:19 PM