geberit AquaClean Tuma Comfort Instructions De Montage página 21

Testing the WC seat heating
Prerequisite
– A hand is placed flat on the marked position of
the WC seat.
– The LED on the lateral control panel lights up
blue and the odour extraction unit runs. A user is
detected.
4
Test the WC seat heating.
Result
ü After a few seconds of warm-up time, the WC
seat is evenly and noticeably warmed.
18014400418479371-1 © 05-2017
967.305.00.0 (01)
Testing the anal shower
Prerequisite
– A hand is placed flat on the marked position of
the WC seat.
– The LED on the lateral control panel lights up
blue and the odour extraction unit runs. A user is
detected.
A shower cycle ends after 50 seconds. If
required, restart the shower cycle.
1
Briefly press the <Shower> button on the
lateral control panel.
ü The device performs pre-rinsing.
ü The spray arm extends.
ü The anal shower starts in oscillating
function. A small amount of water drains
into the WC ceramic appliance via the
overflow. The anal shower is active for
50 s econds.
EN
21