Cleaning And Maintenance - BaByliss PRO BAB2280TTE Manual De Instrucciones

TEMPERATURE CONTROL GUIDE
HAIR TYPE
synthetic
damaged,
couloured
fine
average
thick
very curly
ethnic
USE
• Plug the curling iron in. The red
indicator light will come on.
• Select the desired temperature
(please see temperature control
guide) using the control wheel.
• Press the button on the right
(I).The red and green indicator
lights will flash until the pro-
grammed temperature has been
reached; only the green light will
stay on.
• After use, press the button on the
left (0) to turn the heat off.
• To reactivate the heat, press the
button on the right (I) again.
• The red light will stay on as long
as the wand is plugged in.
WARNING
The barrel becomes very hot in a
few seconds and should not touch
the skin once the wand is plugged
in. This iron becomes extremely
hot when it is set to the highest
SETTING
1-3
3-5
6-10
10-15
15-20
21-22
23-25
temperature. Always test on a
curl to make sure the setting is ap-
propriate for your hair.

CLEANING AND MAINTENANCE

Before removing any hair-product
residues left on the wand:
• Check that the iron is turned off
and unplugged and that it has
cooled.
• Clean the iron using a damp cloth
and non-corrosive detergent or
soap. Before using again, check
that the appliance is dry.
5