Cleaning And Maintenance - BaByliss PRO ConiSmooth BAB2225TTE Manual Del Usuario

hair sections around the outside,
as a single barrel, for a curl that
goes from loose to tight as you
spiral down.
• Open the unit and twist hair
around one barrel for tighter,
high-definition curls.
• For looser, free-flowing curls, eit-
her roll a larger section of hair or
wrap hair around the larger end
of the barrel.
• For tighter, bouncier curls, roll a
smaller section of hair or wrap hair
around the smaller end.
• By starting in different areas of
the barrel, you can create diffe-
rent looks.
• To achieve more even, consistent
curls, start at the tip of the barrel,
wrapping more hair there, decre-
asing the amount of hair wrapped
as you move towards the handle.
Twin barrel loop
• Open the unit and twist the
hair around the two barrels in a
figure-8 pattern to create S-curls.
• The anti-slip silicone guides chan-
nel and hold hair in place for per-
fect spirals.
• Release the ends of your hair and
allow the iron to slide from the
section, naturally and without
pulling.
• Allow your hair to cool before
handling.
Straightening
For a sleek, straight look, use this
iron as you would a straightening
iron.
• Section dry hair evenly, and comb
each section. Position the iron on
hair as far up as you want hair to
be straightened, being careful not
to let the iron touch the scalp.
• Close the iron with the hair bet-
ween the two barrels and gently
pull the iron down to the end of
the section of hair you are straigh-
tening.
6
• Repeat this process several times
if necessary.
• Allow hair to cool before combing.
For optimal hold and results, we
recommend using BaByliss PRO
styling products.

CLEANING AND MAINTENANCE

Before removing any hair-product
residues left on the wand:
• Check that the iron is turned off
and unplugged and that it has
cooled.
• Clean the iron using a damp cloth
and non-corrosive detergent or
soap.
Before using again, check that the
appliance is dry.
7