Cleaning And Maintenance - BaByliss PRO EP TECHNOLOGY 5.0 Manual De Instrucciones

ENGLISH
Straightening iron
BAB2654EPE
EP TECHNOLOGY 5.0
A micrometric metallic coating obtained
by electroplating, a very technical process
similar to what is done in jewelry avoiding
friction on hair for even more smoothness,
containing no chemical agents for better
resistance to high-heat and providing even
heat distribution all through the plates.
• 3 x harder & longer lasting
• 3 x smoother
• Hard-wearing to chemicals
• Lasting & perfect results
• Hair respected & sublimated
FEATURES
• 25mm EP TECHNOLOGY 5.0 plates
• Temperature control (5 settings 130°C -
150°C – 160°C – 180°C - 210°C)
• On/Off switch
• Indicator light
• Swivel cord (2.70 m)
• Multi voltage
SETTING
1 130°C
2 150°C
3 160°C
4 180°C
5 210°C
TEMPERATURE CONTROL GUIDE
HAIR TYPE
Fragile and damaged hair
Thin hair
Normal hair
Thick hair
Curly hair
USE
• Plug the unit in and set the control at the
desired temperature (depending on the
hair type). The wide temperature range
means the straightener can be used safely
on any hair type, even the most damaged
or difficult to style hair.
• Take up a section of hair placing the
straighteners near the roots. Avoid plac-
ing them too close to the scalp. Close the
plates over the section and slide down
the length of the hair, maintaining a light
pressure on the plates. Repeat until you
have straightened all of the hair.

CLEANING AND MAINTENANCE

Before removing any hair product residues
left on the wand:
• Check that the iron is turned off and un-
plugged and that it has cooled.
• Clean the iron using a damp cloth and
non-corrosive detergent or soap. Do not
scratch the plates. Before using again,
check that the appliance is dry.
• Store the unit with the plates closed
against each other to protect them.
3