Troubleshooting; Specifi Cations - Mitsubishi Electric EY-3D-EMT1 Manual De Usuario

Troubleshooting

Before asking for repair of the 3D Emitter, check the following.
• When you change the mode of the projector to the 3D mode, check that the
LED (green) on the 3D Emitter is illuminated.
• See the front of the 3D Emitter through a digital camera or a cell phone
camera and check that the LEDs for infra-red transmission (9) are illuminated.
LED (green)
• See the User Manual supplied with the projector.
Specifi cations
The specifi cations and outside appearance are subject to change without prior
notice.
Model
Dimensions (W x H x D)
Weight
LEDs for infra-red transmission (9)
EY-3D-EMT1
110 x 33 x 49 mm
50 g
EN-9