1. P ress the User Select Button to choose User 1
2. With the cuff wrapped around your arm, press the START/
3. After all symbols disappear, the display will show
IB-WGNBPA540-manual.indd 19
or User 2.
START
STOP
STOP button. Do not inflate the cuff unless it is wrapped
around your arm. All digits will light up to check the display
functions. The checking procedure will be completed after
about 3 seconds.
START
STOP
"00". The monitor is "Ready to Measure" and will
automatically inflate the cuff to start measurement.
OR
19
2009/11/3 下午 1:42