INSTALLING BATTERIES
1. P ress down on latch and lift the battery cover to open
2. Install or replace 4 "AA " sized batteries in the battery
3. Close the battery cover by pushing in the top end of the
Replace the batteries if:
1. T he weak battery symbol appears on the display.
2. Nothing appears on the display when the power is
Replace all batteries at one time (as simultaneous set). Use
only 1.5V AA alkaline batteries. Remove batteries when unit
is not in use for extended periods of time. Date and time will
need to be reset if batteries are removed or replaced. Clean
contacts on battery and in battery compartment with a soft
dry cloth each time you install batteries.
Note: Batteries are hazardous waste. Do not dispose of them
IB-WGNBPA540-manual.indd 11
the battery compartment.
compartment according to the indications inside the
compartment.
battery door.
switched on.
together with the household garbage.
Battery
Cover
11
2009/11/3 下午 1:42