Limitation Of Liability; English - SentrySafe Master Lock LX110B Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
Troubleshooting
THE PROBLEM:
I closed the safe and it opens automatically,
red light blinks and safe beeps 3 times
Red indicator light blinks and there are 3 beeps
after opening the safe
Safe door will not open
Safe door will not open (no lights or sound)
Red indicator light blinks and the safe beeps
five times
Red indicator light blinks and the safe does
not open
Can't enroll finger or fingerprint will not unlock
the safe
Warranty:
Limited Two-Year Manufacturing Warranty
This product is warranted to the original purchaser for two (2) years from the date of purchase. If during that two-year period, this product or any part of the product fails due to a defect in materials or workmanship, Master
Lock Company LLC ("Master Lock") will at its own and sole discretion, repair or replace the product or part free of charge for the original purchaser. Simply contact Master Lock at the most convenient site listed below for
instructions on obtaining repair or replacement. Return of the defective product or part at the customer's expense, along with proof of purchase, may be required. This limited warranty applies only to defects in materials
and workmanship, and does not cover products which have been abused, altered, or misused. This limited warranty also does not cover damage resulting from fire (except for fire-resistant products) or from water (except for
water-resistant products), or from theft or vandalism.
THIS WARRANTY IS LIMITED TO REPAIR OR REPLACEMENT ONLY. The limited warranty does not cover labor for removing, reinstalling or refinishing the product or part, or other materials removed, reinstalled or refinished in
order to repair or replace the product or part. TO THE EXTENT PERMITTED BY LAW, MASTER LOCK DISCLAIMS ALL OTHER IMPLIED OR EXPRESS WARRANTIES INCLUDING ALL WARRANTIES OF MERCHANTABILITY AND/OR FITNESS
FOR A PARTICULAR PURPOSE. TO THE EXTENT THAT ANY IMPLIED WARRANTIES MAY NONETHELESS EXIST BY OPERATION OF LAW, SUCH WARRANTIES ARE LIMITED TO THE DURATION PROVIDED BY LAW.

LIMITATION OF LIABILITY:

The statements made herein are your sole and exclusive remedy against Master Lock and Master Lock shall not be liable for any damages, whether direct, indirect, incidental, special, consequential, exemplary, or otherwise,
including property damage or property loss (including loss or damage of the contents of any product), lost data, lost revenues and lost profits, arising out of any theory of recovery, including statutory, contract or tort.
Notwithstanding the term of any limited or implied warranty, or in the event that any of these limited warranties fails of its essential purpose, in no event will Master Lock's entire liability exceed the purchase price of this
product. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages so the above limitations or exclusions may not apply to you. Some states and provinces do not allow
limitation on how long a limited warranty lasts, so the above limitation may not apply to you. These limited warranties give you specific legal rights, and you may also have other rights which vary from state to state and
province to province. Products purchased in the EU are governed by consumer laws which provide statutory guaranty rights in addition to the warranty stated on any packaging or website associated with this product.
Any warranty stated on any packaging or website associated with this product is not valid in Australia. Product sold in Australia is governed by the consumer warranty contained in the Australian Consumer Law.
Master Lock Company LLC
USA: www.sentrysafe.com or 800-828-1438
Mexico: 001-800-451-0821
EU: www.masterlock.eu
Japan: www.sentryjp.com
WHY IT IS HAPPENING:
The door was not closed far enough when the lock button was pushed,
and the bolts hit the safe wall
Battery power is low
1. Override key is in the locked position
2. Battery power is low
Battery power is dead
The fingerprint memory is full
Sensor failed to read fingerprint
The scanner is unable to identify the fingerprint
THE SOLUTION:
Scan your finger or use the key to retract the bolts and repeat the closing process. The
locking button will not function if this problem occurs
Install four (4) new AA alkaline batteries
1. Ensure that the key is in the unlocked position
2. Replace batteries
Use the Micro USB to open the safe and replace batteries or use the override key to open
the safe
Delete fingerprints
Review the additional notes in the fingerprint programming section
1. Do not choose a finger with a cut or scar
2. Make sure hands are clean and dry before programming or operating the
fingerprint scanner
3. The fingerprint sensor may not work well when cold

ENGLISH

3

Publicidad

Tabla de contenido
loading

Tabla de contenido