Lenco CR-605 Manual De Instrucciones página 6

Setting the time & date manually
In normal time mode (= radio off), short press the "Preset" button (2).
Then use the "< Select >" buttons (3 & 4) to decrease/increase the hours and confirm with
the "Snooze/Enter/Scan" button (5). Then set the minutes, date, month and year the same
way as setting the hours.
NOTE: The Time and date will be set automatically by the DAB+ and/or FM signal, except if
auto update is disable in the time menu.
Alarm Settings
In normal time mode (= radio off), short press the "Mode" button (7).
Now use the "< Select >" buttons (3 & 4) to choose between alarm 1 or alarm 2 and confirm
with the "Snooze/Enter/Scan" button (5).
Now use the "< Select >" buttons (3 & 4) to decrease/increase the hours and confirm with
the "Snooze/Enter/Scan" button (5). Now set the minutes, alarm duration (15, 30, 45, 60,
90 minutes), alarm source (buzzer, DAB+, or FM), frequency (daily, once, weekends,
weekdays), volume, alarm on/off.
When the alarm is triggered, at the configured time, press the "Snooze Enter/Scan" button
(5) to snooze. The alarm will trigger again in 9 minutes.
Press the power " " button (6) to turn the alarm off.
General Radio Operations
To
Turn radio on and off
Change function: DAB+ & FM
Adjust volume
Scan for stations (DAB+ &
FM)(stations will automatically be
saved as preset)
Select a stored preset station
Storing a preset manually
Do this
Press the " " button (6)
Press the "Mode" button (7)
Press the "– Volume +" buttons (8 & 9)
Press and hold down the "Snooze
Enter/Scan" button (5)
Short press the "Preset" button (2). Select
your desired preset with the "< Select >"
buttons (3 & 4) and press the "Snooze
Enter/Scan" button (5) to confirm you
selection.
*Stations are stored automatically when
doing an auto scan.
Tune to your desired station. Press and hold
the "Preset" button (2). Select the desired
preset location with the "< Select >" buttons
(3 & 4) and press the "Snooze Enter/Scan"
button (5) to confirm your selection.
6