Changing Settings - geberit MONOLITH PLUS Manual Del Usuario

Changing settings

1
Press and hold the <Odour
extraction> button for approx. three
seconds.
✓ Both indicator lights flash three
times. You are now in Settings
mode.
2
Change the setting (see step 3) or
press the <Odour extraction> button
repeatedly until you reach the
desired menu.
✓ The selected menu is indicated
by the colour of the odour
extraction unit indicator light.
3
Press the <Large flush volume>
button repeatedly to change the
setting.
✓ The selected setting is indicated
by the colour of the orientation
light.
18014402130870411-1 © 12-2018
968.239.00.0 (02)
4
5
Result
✓ Both indicator lights flash three times.
inaktiv / inactive
Press the <Small flush volume>
button to save the setting you have
made.
Both indicator lights flash briefly to
confirm. if the settings are not saved
or if no changes are made within
three minutes, the unit automatically
exits Settings mode without changing
the existing settings.
Press and hold the <Odour extraction
unit> button for approx. three
seconds to exit Settings mode.
The sanitary module is once more ready
for operation.
EN
15