Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Transmission - Max Throughput Test
1.
Connect both display and remote units to the network or cable under test
2.
Pair the remote unit with the display unit via
status connection will light up blue once successfully paired.
Set the link speed to Auto in the display unit via Settings - Network -
3.
RJ45 - Link Speed
4.
Select Test template on different frame size
5.
Select Pass/Fail limit via a set of standard limit or custom limit and save
change
Run the Test and flip graphic results to tabular
6.
7.
Save the results
1
4
2
5
Settings - Pairing. The
3
6
Proof of Performance
EN
11
Publicidad
Tabla de contenido
