Ideal Networks SignalTEK 10G Manual Del Usuario página 16

Transmission - Video Data Test
EN
1. Connect both display and remote units to the network or cable under test
2. Pair the remote unit with the display unit via
status connection will light up blue once successfully paired
Set the link speed to Auto in the display unit via Settings - Network -
3.
RJ45 - Link Speed
4. Set up No. of streams, definition, frame loss type & Limit and test duration
in Video Data settings
5. Press Test key to run the test
6. Packet loss and jitter/delay info will be presented
7. Save the results
1
4
16
www.idealnetworks.net
2
5
Settings - Pairing. The
3
6