Sony PDW-680 Manual Del Usuario página 17

For the customers in Europe
This product with the CE marking complies
with the EMC Directive issued by the
Commission of the European Community.
Compliance with this directive implies
conformity to the following European
standards:
• EN55103-1 : Electromagnetic
Interference(Emission)
• EN55103-2 : Electromagnetic
Susceptibility(Immunity)
This product is intended for use in the
following Electromagnetic Environments: E1
(residential), E2 (commercial and light
industrial), E3 (urban outdoors), E4
(controlled EMC environment, ex. TV studio).
For the customers in Europe
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan, Minato-ku, Tokyo,
108-0075 Japan.
The Authorized Representative for EMC and
product safety is Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart,
Germany. For any service or guarantee
matters please refer to the addresses given
in separate service or guarantee documents.
CAUTION
When you connect the network cable of the
unit to peripheral device, use a shielded-type
cable to prevent malfunction due to radiation
noise.
Caution
Use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous
radiation exposure.
This Professional Disc Camcorder is
classified as a CLASS 1 LASER PRODUCT.
Tämä Professional Disc Recorder on
luokiteltu 1. LUOKAN LASERTUOTTEEKSI.
Den här Professional Disc Camcorder
klassificeras som en LASERPRODUKT AV
KLASS 1.
VAROITUS!
LAITTEEN KÄYTTÄMINEN MUULLA KUIN
TÄSSÄ KÄYTTÖOHJEESSA MAINITULLA
TAVALLA SAATTAA ALTISTAA
KÄYTTÄJÄN TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE
LASERSÄTEILYLLE.
This label is located
inside the outside
panel of the unit.
Denna etikett finns på
enhetens inre, högra
sida.
Denne mærkat sidder
på enhedens
udvendige panel.
Tämä kyltti sijaitsee
laitteen ulkopaneelin
sisäpuolella.
Dette merket er
plassert på innsiden
av enhetens ytre
panel.
GB
17