Bresser 70/400 AR-TELESKOP Instrucciones De Uso página 15



Abb. 2
How to insert an eyepiece
Barlow Lens
Connect the telescope tube (8) to the tripod head (Abb. 2). Use the
Fixation screw for the Telescope tube (12) to firmly connect both
parts.
Take the lens cap off the eyepiece holder (2). You can
now place the zenith mirror (3) into the eyepiece hol-
der and secure it with the small screw on the connec-
tor. Next, set the eyepiece (5) into the opening of the
zenith mirror (3). Here too, there is a screw with which
you can screw the eyepiece onto the zenith mirror.
Note: First, put the eyepiece with the largest focal
width (e.g. 20 mm) onto the zenith mirror. While you'll
get the least amount of magnification, it will be easier
for you to view things.
Optional: The Barlow lens can be mounted between
the zenith mirror and the eyepiece to further triple the
magnification.
EN
15