Before You Start; Getting Started; Charging The Power Bank - Silvercrest SPB 5.000 A1 Manual Del Usuario E Información De Servicio

Before you start

Remove the power bank and its accessories from the package
and remove the plastic films.

Getting started

The power bank must never be charged and be
used to recharge an external device at the same
time.

Charging the power bank

Because of its high input current, never use a
notebook or PC to charge the power bank, only use
a suitable power adapter (5V
supplied).
To charge the built-in battery of your power bank, use the
supplied USB charging cable (B) to connect the power bank to
a suitable USB power adapter (not supplied). To do so, insert
the Micro USB plug of the USB charging cable (B) into the
power bank Micro USB port (3) and then connect the USB
plug to the USB port of the power adapter. During the
charging process, the LEDs (5) inform you about the current
state of charge of the power bank.
SilverCrest SPB 5.000 A1
, min. 2.1A, not
English - 27