Publicidad
Step 18
NOTE: You will lift the DOOR by holding onto the ends of the DOOR
å
TRACK TUBE while the DOOR hangs from the TUBE.
NOTE: A corner of the unit is cut out to show part of the assembly.
å
Place the DOOR TRACK TUBE (168M) with the DOOR FRAME (P)
å
onto the DOOR TRACK SUPPORTS (170M).
Now, fasten the DOOR TRACK TUBE (168M) to the two outer
å
DOOR TRACK SUPPORTS (170M). Use two GOLD 1/2" PAN
HEAD SCREWS (129S).
Carefully pull the bottom of the DOOR FRAME (P) out at an angle.
å
Then, push up on the RETAINING BARS (155M) on the bottom edge
of the DOOR FRAME and insert the RETAINING BARS into the
DOOR TRACK (140M). Then, press down on the RETAINING BARS.
See the next step for DOOR adjustments.
å
129S
155M
www.sauder.com/services
P
140M
168M
GOLD 1/2" PAN HEAD SCREW
(2 used in this step)
423808
Almost time to
celebrate! With a nap.
170M
129S
Page 23
Publicidad
