Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Push thirteen HIDDEN CAMS (1F) into the ENDS (A and B),
å
UPRIGHT (D), BOTTOM (F), and TOP MOLDING (G). Then,
insert the metal end of a CAM DOWEL (2F) into each
HIDDEN CAM.
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Hole
G
Page 6
Do not tighten the HIDDEN CAMS in this step.
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
F
1F
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
D
B
Arrow
Metal end
2F
423808
Arrow
2F
Metal end
(13 used)
A
www.sauder.com/services
1F
Publicidad
