Bosch Unlimited BCS1 Serie Instrucciones De Uso página 47

Fitting the wall mount
2
Fig.
Fit the wall mount close to a socket.
To do this, remove the front plate from the wall
mount. Insert your finger into the wall mount from
below, and push the front plate from the inside and
out of the locking mechanism. Use the screws provi-
ded (or equivalent screws) to mount the wall mount
on the wall.
Put the front plate back on and lock it in place to
secure the connection in place.
Placing in the wall mount
3
Fig.
Place the vacuum cleaner into the wall mount from
above.
Assembling the appliance
4
Fig.
Fit the end of the suction tube onto the vacuum
cleaner's connection port and lock it in place.
To release the suction tube, press the release button
and pull the suction tube down to remove it
5
Fig.
Insert the end of the suction tube into the floor nozz-
le and lock it into place.
To release the floor nozzle, press the release button
and pull the suction tube out of the floor nozzle.
Vacuum-cleaning
6
Fig.
The vacuum cleaner can be switched on and off by
pushing the On/Off switch on the handle in the direc-
tion of the arrow. When the vacuum cleaner is switched
on, the indicator light will be lit green.
7
Fig.
When the appliance is running the turbo function can
be activated by pushing the turbo switch on the vacu-
um cleaner in the direction of the arrow. The indicator
light will flash green rapidly.
Runtime
The runtime time stated here may vary due to charge
status, battery temperature and battery age.
On normal mode with
non-electrical accesso-
ries for cleaning furniture
etc.
On normal mode with
electrical nozzle for
normal cleaning tasks
Turbo mode with elec-
trical floor nozzle and
for demanding cleaning
tasks
8
Fig. Vacuum-cleaning with accessories
Attach the nozzles to the suction tube or the appliance's
connection port as required:
a) Crevice nozzle for vacuuming crevices and corners, etc.
b) 2-in-1 furniture brush with upholstery nozzle for vacu-
um-cleaning window frames, cupboards, furniture, etc.
After use, reinsert the crevice nozzle and 2-in-1 fur-
niture brush with upholstery nozzle into the acces-
sories holder.
After using the appliance
Switch off the appliance once you have finished va-
6
cuuming.
Fig.
9
Fig. Emptying the dust container
In order to achieve the best possible vacuuming re-
sults, the dust container should be emptied after every
use or, at the latest, when dust at one point in the dust
container has reached the mark.
We recommend that you do not fill the dust container
beyond the mark as this may lead to the filter becoming
clogged with dust.
When emptying the dust container, always check how
much dust there is in the filter unit and, if necessary,
clean it as detailed in the "Filter care" instructions.
13
Fig.
!
Caution: The filter can only be cleaned if the appli-
ance is switched off.
Never vacuum-clean without the filter unit in place.
10
Fig.
Use the release button to release the dust container,
and remove the dust container from the appliance.
11
Fig.
Take the filter unit out of the dust container
Empty the dust container.
* Depending on model
For one 3,0Ah Bosch
Power for ALL battery
Up to 60 min.
Up to 45 min.
Up to 7 min.
45