BioTel Care BGM 4 Manual Del Usuario página 44

2. To access the main menu, use
the UP/Down keys on the left
side of the BGM. Switch modes
from Normal Test Mode to L1
Control Solution Mode.
To test Level 1 (L1) control
solution, use the UP/DOWN
buttons to highlight L1 mode.
Press the middle (ENTER)
button to select L1 mode.
Upon successful completion of
Level 1 (L1), test Level 2 (L2)
control solution:
Use the UP/DOWN keys on the
left side of the BGM to access
the main menu. Switch modes
from Normal Test Mode to L2
Control Solution Mode.
To test Level 2 (L2) control
solution, use the UP/DOWN
buttons to highlight L2 mode.
Press the middle (ENTER)
button to select L2 mode.
44
Step-by-Step Guide to Control
Solution Testing
1. Power on the BioTel Care® BGM
by using the PWR button on the
right side of the BGM.
The device starts on the Main
Menu. Once start up is completed,
press Test Mode and the device
will be ready to check blood
glucose. You will see the "Insert
Test Strip" screen as shown.