John Bunn DigiO2 Operación Manual página 4

WARNING: If components are damaged or missing, contact your dealer immediately.
DO NOT use substitute parts.
WARNING: Inspect the device before use to ensure that there is no visible damage
that may affect patient or user's safety or measurement performance. Thereafter,
inspect the device at least once a week.
WARNING: GF Health Products, Inc. assumes no responsibility for any damage or
injury caused by improper installation or use of this product.
WARNING: DO NOT open the oximeter housing. It contains no serviceable parts.
Service must be performed by trained, authorized personnel only. Otherwise, device
failure and health hazard may occur.
WARNING: EXPLOSION HAZARD: Do not use the oximeter in the presence of
flammable anesthetics, explosive substances, vapors or liquids.
WARNING: The oximeter is designed for real-time and rapid measurement. It is not
suitable for long-time continuous patient monitoring. DO NOT apply the sensor to
the same finger for more than two hours. If any readings are found to be abnormal,
please change the position of the sensor.
WARNING: The oximeter is intended only as an adjunct in patient assessment. It
must be used in conjunction with clinical signs and symptoms. It is intended as a
measuring, not a treatment, device.
JB02007-INS-LAB-RevC16 4