Features; Name And Model; Battery Installation - John Bunn DigiO2 Operación Manual

Features

The John Bunn DigiO
patients by combining the sensor and monitor into one integrated, compact, easy to
use device with single-button operation. The oximeter can accurately measure pulse
oxygen saturation (SpO
pulse strength. When a finger is inserted into the sensor's rubber cushion, the SpO
value and pulse rate value automatically display on the screen. The oximeter features
a bright-color LED screen with multi-directional displays that enable the user to read
results from any angle. The oximeter features both audible and visible alarms and a low
voltage indicator. The oximeter powers off automatically in eight seconds when not in
use. The oximeter provides approximately 2,000 spot checks with the use of alkaline
batteries.

Name and Model

Name: John Bunn DigiO
Model: JB02007

BATTERY INSTALLATION

1. Refer to Figure 3; insert two AAA batteries, oriented
as shown, into the battery compartment.
2. Replace the cover.
Info: Ensure the batteries are correctly installed. Incorrect
installation will prevent the device from operating.
JB02007-INS-LAB-RevC16
Finger Pulse Oximeter provides a simple way to spot-check
2
) value, pulse rate value, and blood perfusion index (PI) or
2
Finger Pulse Oximeter
2
Figure 3
battery installation
2
8