Maximum Carrying Capacity: : 110lbs (50kg)
Parts List: (Refer to Fig.1a)
Qty
Item
1
Front Cross Bar - with Buffer Strip
1
Rear Cross Bar - with Buffer Strip
2
Left End Support
2
Right End Support
1
Front Left / Rear Right Strap
1
Front Right / Rear Left Strap
1
Rubber Pad Kit
4
Hinge
1
Security Key
4
M6 x 50mm Bolt
4
1/2" Screw
4
End Support Cover Kit
1
Fitting Instructions
1
Warranty
NOTE: Prior to Assembly
Prior to assembling, check that the kit contains all the parts you will
need to fit the Roof Racks. Refer to the Parts List for guidance.
Please read these fitting instructions prior to assembly.
STEP 1: Fitting Straps to End Supports
Ensure the Lock Barrels have been inserted into the End Support
Covers before assembly.
Ensure strap notches correspond with mount positions on the
vehicle (Fig 2).
FR = Front Right; FL = Front Left
RR = Rear Right; RL = Rear Left.
A.
Feed the strap neck through the cavity in the End Support (Fig 3a).
When the Strap neck has been pushed through the End Support
B.
cavity, rotate the strap downwards until the mounting holes in the
End Support and the strap are alligned.
C. Use the security key provided to feed the bolt into the cage nut in
the top of the strap.
The bolt head should mate up flush with its mounting face (Fig 3b).
D. When threading the bolt through the cage nut in the top of the strap,
ensure to allow a gap of approx. 24mm from the top of the strap
neck to the bolt mounting face. (Fig 3c).
This will aid in the fitment of the roof rack onto the vehilcle roof as
described on Page 2 of this document Step 2c.
www.rolaproducts.com
Cequent Performance Products - Plymouth, MI
Technical Service: (888)521-0510
HYUNDAI ELANTRA TOURING
2009 - on
Fig. 1a
Part No.
1003-0945
1003-0910
27-0757
27-0761
114660
114661
*4x
25-0124
27-0760
22-0811
22-0355
22-0221
25-0150
Front Right
Fit Kit - Hardware
Security Key
Fig. 2
Fig 3a.
m )
4 5 m
/ 4 " ( 9
3 7 - 1
m m )
" ( 9 1 0
3 / 1 6
3 5 - 1
*4x
End Support
(27-0757 Left,
27-0761 Right)
Pad Kit
(25-0124)
Front Left
50mm Bolt
(22-0355)
4x
1/2" Screw
4x
(22-0221)
(22-0811)
1 Notch
Front Left
Rear Right
Fig 3b.
59800
Cross Bar
(1003-0945,
1009-0910)
End Support
Cover
(25-0150)
Rear Right
Rear Left
Hinge
(27-0760)
2 Notchs
Front Right
Rear Left
Issue A
59800N
03/05/09
Sheet 1 of 2
PRINTED IN AUSTRALIA
Printed in XXXXX