To Disable Sleep Mode On Computer (Windows Vista); Connection To Pc; Weather Forecast; Weather Warning Message - Oregon Scientific RMS600 Manual De Usuario

TO DISABLE SLEEP MODE ON COMPUTER
(WINDOWS VISTA)
1. Right click on Desktop.
2. Choose "Personalize".
3. Click on "Screen Saver" Tab in the Display Properties
window.
4. Click on "Change Power Settings" located at the bottom
half of window.
5. Select "High Performance" and click "Change plan
settings".
6. Click "Change advanced power settings".
7. Click "Sleep" and click "Hibernate after".
8. Click "Setting" and set "0" minutes.
9. Click "Apply" and then "OK".

CONNECTION TO PC

To upload the weather data to the computer:
1. Plug one end of the USB cable into the USB port and
the other end into the computer.
2. If data upload is completed, the display will show
"
NOTE
The USB is only used for uploading weather data. It
cannot be used for charging battery power.
P/N: 086L005521-019 REV1
9/92
".

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of
weather within a 30-50 km (19-31 mile) radius with a
75% accuracy.
ICON

WEATHER WARNING MESSAGE

The weather warning messages provide indications of
probable circumstances that may arise based on the
weather station's calculations. The meanings for the
warnings are illustrated below:
Warning
Risk of high temperatures
Risk of fast wind speeds
7
DESCRIPTION
Sunny
Partially Cloudy
Cloudy
Rainy
Snowy
Meaning