Data Transmission; To Disable Sleep Mode On Computer (Windows Xp Or Earlier Version); To Disable Sleep Mode On Computer (Windows Vista) - Oregon Scientific I300 Manual De Uso

3. Press RESET after each battery change.
NOTE Batteries should not be exposed to excessive heat
such as sunshine or fire.

DATA TRANSMISSION

To upload / download weather data:
• Install and start the PC software.
• Select world cities in the software programme.
• Set up the remote sensor.
• Connect the USB Communications Hub to the
computer.
• Set up the main unit and register it with the USB
Communications Hub.
IMPORTANT
• Always connect the USB Communications Hub to the
computer.
• Ensure Sleep Mode on computer is disabled as this
will adversely affect the operation.
TO DISABLE SLEEP MODE ON COMPUTER
(WINDOWS XP OR EARLIER VERSION)
1. Right click on Desktop.
2. Choose "Properties".
3. Click on "Screen Saver" Tab in the Display Properties
window.
4. Click on "Power" located at the bottom half of
window.
5. A new window "Power Options Properties" will open.
6. Under "System standby" option, choose "Never" in
drop down menu.
7. Click "Apply" and then click "OK".
8. Previous window will return. Click "OK" to confirm and
exit.
TO DISABLE SLEEP MODE ON COMPUTER
(WINDOWS VISTA)
1. Right click on Desktop.
2. Choose "Personalize".
3. Click on "Screen Saver" Tab in the Display Properties
window.
4. Click on "Change Power Settings" located at the bottom
half of window.
5. Select "High Performance" and click "Change plan
settings".
6. Click "Change advanced power settings".
7. Click "Sleep" and click "Hibernate after".
8. Click "Setting" and set "0" minutes.
9. Click "Apply" and then "OK".
7