Clock; Clock Reception; Manually Set Clock - Oregon Scientific RMS600 Manual De Usuario

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its clock
automatically with a clock signal.
RMS600:
Slide EU / UK to select the signal received.
EU: DCF-77 signal: within 1500 km (932 miles) of
•
Frankfurt, Germany.
UK: MSF-60 signal: within 1500 km (932 miles) of
•
Anthorn, England.
RMS600A:
WWVB-60 signal: within 3200 km (2000 miles) of Fort
Collins, Colorado.
To enable / disable clock signal reception:
Press and hold
signal reception.
NOTE
Reception takes 2-10 minutes. If the signal is weak,
it can take up to 24 hours to get a valid signal. If signal
reception is unsuccessful, place your unit next to a window,
press and hold
P/N: 086L005521-019 REV1
7/92
to enable or to disable clock
to force another signal search.
Clock signal reception indicator:
STRONG SIGNAL

MANUALLY SET CLOCK

To set the clock manually, disable the clock signal reception
first.
1. Press and hold MODE.
2. Press or
order is: time zone, 12/24 hr format, hour, minute, year,
calendar mode (month – day / day – month), month, day
and language.
3. Press MODE to confirm.
RMS600: Time zone sets the clock +/- 23 hours from the
received clock signal time.
RMS600A: Select the time zone: (P) Pacific, (M) Mountain,
(C) Central, or (E) Eastern.
NOTE
The language options are English (E), German (D),
French (F), Italian (I), Spanish (S) and Russian (R).
5
WEAK / NO SIGNAL
to change the settings. The settings