DeFelsko PosiTector 200 Manual De Instrucciones página 3

Press the
Select Exit to close the Menu.
When powered-up, the PosiTector automatically
determines which probe is attached and does a
self-check.
To disconnect a probe from a body, slide the plastic
probe connector horizontally (in the direction of the
arrow) away from the body. Reverse these steps to
attach a different probe. It is not necessary to power-
down the Gage when switching probes.
PosiTector 200 probes are available for measuring
a wide variety of coating thickness applications.
B probe - 13 to 1000 microns (0.5 to 40 mils)
Ideal for polymer coatings on wood, plastic, composites, etc.
C probe - 50 to 3800 microns (2 to 150 mils)
Ideal for thicker coatings on concrete, fiberglass, etc.
D probe - 50 to 7600 microns (2 to 300 mils)
Ideal for thick, soft (attenuative) coatings such as polyurea
NOTE:
Range limits apply to polymer coatings only.
button or swipe right to return to a previous screen.
When a Menu option is highlighted, the
icon indicates on-gage help is available.
Press
help. A formatted PDF containing all on-
gage help items is available at
www.defelsko.com/help
NOTE:
have the latest on-gage help information.
indicates that a sub-menu exists for the
Menu option. Select the option to display its
sub menu.
or touch the
Update your gage to ensure that you
Probes
2
icon to display the