Kohler K-7761 Guia De Instalacion página 4

Escutcheon
Valve
Body
Gasket
Washer
2. Valve Body/Tee Installation
Attach and tighten a hose to each valve body.
Slide the gasket over the top of each valve body.
Thread each valve body onto the escutcheon.
Place each valve body through the appropriate sink hole. The hot
valve (marked in red) should be placed on the left side and the
cold valve on the right side.
Secure each valve with a washer and a nut.
Connect and tighten the hose to the shank tee.
111056-2-BB
Shank
Tee
Hose
Nut
4 Kohler Co.