e Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tools operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g Use the power tool, accessories and tool bits
etc., in accordance with these instructions
and in the manner intended for the particular
type of power tool, taking into account the
working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
5 Battery tool use and care
a Ensure the switch is in the off position before
inserting battery pack. Inserting the battery
pack into power tools that have the switch on
invites accidents.
b Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
c Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
d When battery pack is not in use, keep it away
from other metal objects like paper clips,
coins, keys, nails, screws, or other small metal
objects that can make a connection from one
terminal to another. Shorting the battery
terminals together may cause burns or a fire.
e Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
6 Service
a Have your power tool serviced by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
All manuals and user guides at all-guides.com
Additional safety instructions for rotary hammers
• Wear ear protectors. Exposure to noise can
• Use auxiliary handles supplied with the tool.
Additional safety instructions for battery packs
and chargers
• Make sure that the battery pack is dry and clean
• Use only chargers labelled „NiMH" or „NiMH +
• Never carry the charger by its cord. Never pull
• Do not expose the charger to damp or wet
• Do not attempt to charge wet battery packs.
• Never attempt to open a battery pack for any
• Always follow the instructions in the back of this
• When not in use, chargers and battery packs
Labels on charger and battery pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack show
the following pictographs:
cause hearing loss.
Loss of control can cause personal injury.
before inserting it into the charger.
NiCd" to charge D
WALT NiMH battery packs.
E
the cord to disconnect from the socket. Keep the
cord away from heat, oil and sharp edges.
conditions.
reason.
manual for battery pack disposal.
must be stored in a dry place and locked up
securely, out of reach of children.
Battery charging
Battery charged
Problem charging
+
Charges NiMH and NiCd battery packs
Do not probe with conductive objects
Do not charge damaged battery packs
Read instruction manual before use
E N G L I S H
27