Reolink GO Manual Del Usuario página 7

Notes on PIR Motion Sensor
PIR Sensor Detection Distance
The PIR detection range can be turned to meet your specific needs. You may refer to the following
table to set it up in Reolink App Device Settings.
Sensitivity Value
Low 0 - 50
Mid 51 - 80
High 81 - 100
NOTE: Higher sensitivity ofgers longer detecting distance, but it would lead to more false alarms.
It's recommended to set up the sensitivity level to "Low" or "Mid" when you install the
camera outdoors.
11 English
Detection Distance
(For moving and living objects)
Up to 5 meters (16ft)
Up to 8 meters (26ft)
Up to 10 meters (33ft)
Important Notes on Reducing
!
False Alarms
• Do not face the camera towards any objects with bright lights, including
sunshine, bright lamp lights, etc.
• Do not place the camera too close to a place with heavytraffic. Based on
our numerous tests, the recommended distance between the camera and
the vehicle would be 16 meters (52ft).
• Do not place the camera near outlets, including the air conditioner vents,
humidifier outlets, the heat transfer vents of projectors, etc.
• Do not install the camera at places with strong wind.
• Do not face the camera towards a mirror.
• Keep the camera at least 1 meter away from any wireless devices,
including WiFi routers and phones in order to avoid wireless interference.
English 12