INSIDE MOUNT (IM)
STEP 3: INSTALLING THE SHADE
•
Hook the rear lip of the headrail on the mounting bracket spring tab.
•
While pushing back against the bracket, rotate the front of the headrail upward to
engage the top locking tab of the mounting bracket.
•
The shade will easily snap onto the bracket
•
Use the included screws to secure the cord cleat device to the mounting surface
(see additional instructions included with cord cleat) .
•
Repeat for each bracket.
CAUTION: Be sure the bracket and headrail are properly secured before
!
operating the shade. Failure to do so may result in the shade falling and
possible injury.
INSTALLATION
Front lip
Front Lip
Spring tab
Spring Tab
Headrail
Headrail
Corded Lift Control
11