Levolor Natural Shades Instalación página 12

INSTALLATION
OUTSIDE MOUNT (OM)
Drywall
Anchor
Bracket
Screw
STEP 2: INSTALL THE BRACKETS
IMPORTANT: Use drywall anchors when mounting into drywall (not provided).
IMPORTANT: The rear of the brackets must be flush against a flat mounting surface.
Do NOT mount brackets on curved molding.
•
If your shade includes spacers, slip the spacers over the bolt section of the bracket
at this time.
•
Using the marks made as a guide, attach the brackets, using two screws per
bracket. The screws should be inserted in bracket holes diagonally from each other.
.
12
Cordless Lift Control