Operation Operating The Shade; Cleaning Procedures - Levolor Natural Shades Instalación

OPERATION | CLEANING AND CARE
CORDLESS:
• To lower your shade, place hand on the bottom of the shade and pull down. Release
and the shade will stay in place.
• To raise your shade, place hand on the bottom of the shade and pull up until the
desired location is reached. Release and the shade will stay in place.
Note: If your shades have hold-down brackets, unhook the bottom rail before raising.

CLEANING PROCEDURES

Keep your Natural shades looking their best by periodically vacuuming them with a
brush attachment. Do not use water, solvents, or abrasive solutions to clean the shade.
Improper cleaning may damage the shade and void warranty.
DUSTING
Use a feather duster for regular cleaning.
FORCED AIR
Blow away dirt and debris using clean compressed air.
VACUUMING
Use a low suction vacuum with a brush-type cleaner attachment;
stroke lightly over the shade to clean.
16
Cordless Lift Control
Bottom-Up Shade